Single Stroke® Honing Tools

* The Single Stroke® Honing process is a fast and accurate method of sizing certain bores to final size. The Sunnen Single Stroke® Honing Tool used is an expandable, superabrasive sleeve mounted on a tapered arbor. The sleeve is expanded only during setup, and no adjustments are necessary during the honing operation. The rotating Single Stroke Honing Tool is pushed through the bore only once, with the workpiece being removed after the return stroke.

It should be pointed out that the Single Stroke® Honing process is limited with respect to the types and volumes of material that can be removed. The size and volume of chips removed must be no more than there is clearance for between the diamond grits on the sleeve. Therefore, the Single Stroke Honing process is best suited for honing operations that produce a relatively low volume of chips, such as interrupted or short bores, and is most successful in honing cast iron and powered metals. *
High-Production Helix Single Stroke Honing® Tools
High-Production
Helix Single Stroke Honing® Tools
More Information
 
Single Stroke Honing® Tools
Single Stroke
Honing® Tools
More Information
 
 
 



Print
Find A Sales Rep
Select your state to find a rep near you.
Ask The Expert
Select a category from the dropdown list and then click the "ask" button to continue.