HTH Series Tube Honing Machine

Product Image
Click To Enlarge
MACHINE SPECIFICATIONS
  • Diameter Range (I.D.): 25 – 1000 mm (1 – 40 in)
  • Diameter Range (O.D.):
    • 60 -400 mm (2.4 – 15.8 in) standard
    • 350 – 600 mm (13.8 – 23.6) optional
  • Spindle Motor: 6.0 kW
  • Spindle Speed Rate: 15-450 RPM
FEATURES & BENEFITS
  • A PLC control and digital display allow complete control and monitoring of machine conditions.
  • A built-in load meter indicates high and low spots in the tube bore as the operator can adjust the stroke as required for optimum cycle time.
  • operator can also work out tight spots in the bore when using the Short Stroke Cycle and Stroke Dwell features.
  • The Sunnen Modular Honing Tool System continually compensates for stock removal and stone wear to keep the machine running at peak efficiency at all times.
  • The HTH series is available in two-meter, four-meter, six-meter, eight-meter, and ten-meter models. Several different tooling systems are available depending on the specific application.
  • Lifetime application service with every machine purchase.
Find A Sales Rep

RELATED RESOURCES
 


ADDITIONAL INFORMATION

The HTH-Series is a versatile tube honing machine that combines the best features of other Sunnen and General Hone machines. Precision sizing and finishing of long and large bores has never been easier or more productive.



Print
Find A Sales Rep
Select your state to find a rep near you.
Ask The Expert
Select a category from the dropdown list and then click the "ask" button to continue.